Chuck,/Cypriote1530524.html,goldenarcher.net,$44,2,Tools Home Improvement , Power Hand Tools,Arbors,1/4″,with,Drill $44 1/4″ Drill Chuck with 2 Arbors Tools Home Improvement Power Hand Tools $44 1/4″ Drill Chuck with 2 Arbors Tools Home Improvement Power Hand Tools 1 OFFicial store 4″ Drill Chuck Arbors 2 with 1 OFFicial store 4″ Drill Chuck Arbors 2 with Chuck,/Cypriote1530524.html,goldenarcher.net,$44,2,Tools Home Improvement , Power Hand Tools,Arbors,1/4″,with,Drill
A drill chuck is probably the most important accessory you will need for your lathe. It will enable you to accurately centerline drill, ream, or tap any part mounted on the lathe. The part to be machined is chuck or collet mounted in the headstock. The tool is mounted in the tailstock chuck and fed into the part using the tailstock ram feed. Parts that are going to be mounted between centers can be center drilled this way. Other parts requiring a hole accurately drilled on-center can also be machined this way. The Sherline tailstock chuck P/N 1072 is a precision 3/32″ (2.4 mm) to 1/4″ (6.4 mm) 3-jaw chuck complete with key. The chuck is fitted with a #0 Morse arbor for use in the tailstock. Also included is a #1 Morse arbor and drawbolt so the chuck can be used in the lathe or mill headstock as well. NOTE: If runout of less than .003″ amount is required, collets should be used to hold the drill rather than a chuck.
Forty nine and counting! Greece Is publications feature in-depth, inspirational stories and tried-and-true guides and tips on our country’s most popular destinations, including Athens, Santorini, Mykonos, Thessaloniki, Halkidiki, Peloponnese, Rhodes, Kos-Nisyros, Dodecanese, Crete and Kastellorizo. The series also comprises special editions dedicated to themes closely tied to Greek history, such as Democracy, Wine, Health and the Olympic Games. Browse through our magazines and start exploring this amazing country and its heritage.